DoroTEK
deutsch
 
>> Home > Infrared Detectors > Data sheets of accessories

Data sheets of accessories

 

1) Preamplifier

VIGO Preamplifier BPI VIGO Preamplifier MIP VIGO Preamplifier FIP
Preamplifier type BIP Preamplifier type MIP GHz-preamplifier FIP-series

 

The Preamplifier made by VIGO System S.A. can be divided into 5 groups:

  • Series VIP : VIP is the transimpedance, AC or DC coupled, standalone preamplifier. It is dedicated for operation with uncooled, no biasing IR detectors in
    BNC packages, cable connection to the detector, suitable for the laboratory use and system integration
  • Series FIP FIP is the high speed transimpedance, AC coupled preamplifier. It is dedicated for high speed infrared measurements (bandwidth 1 GHz)
    FIP preamplifier is designed for operation with either biased or nonbiased.
  • Series BIP : BIP is the transimpedance, AC or DC coupled preamplifier. It is dedicated for OEM applications and requires external heat sink (see
    Recommended Accessories). BIP preamplifier is designed for operation with either biased or non-biased TE cooled detectors.
  • Series MIP : MIP is the transimpedance, AC or DC coupled preamplifier. It is dedicated for BenchTop applications. Package type F is equipped with fan and does not require additonal heat sink. Package type NF requires additional heat dissipation (provided by user). MIP preamplifier is designed for operation with either biased or non-biased cooled detectors.
  • Series PIP : Programmable "SMART" Preamplifier. Dedicated for operation with 2-, 3- and 4-stage TE cooled or uncooled detectors. Highly flexible configuration allows the user to adapt the module to variety of system parameters.
  • Series SIP : SIP is the ultra small transimpedance, AC or DC coupled preamplifier. It is dedicated for OEM applications and requires external heat sink (see
    Recommended Accessories). SIP is designed for operation with either biased or non-biased and either cooled or uncooled detectors.
  • Series QIP : QIP is the four channel, transimpedance, AC or DC coupled preamplifier. It is dedicated to BenchTop or OEM applications and, in some cases, requires external heat sink (see Recommended Accessories). QIP is designed to work with either biased or non-biased, uncooled ,quadrant geometry detectors.

Important parameter are the way of couppling (AC or DC) and the bandwidth

  • DC - Coupling, in the preamplifier name the "x" will be replaced by "D", e.g. VPDC or MIPDC; the bandwidth of the module starts at 0 Hz, thus also cw-radiation can be measured
  • AC - Couppling, in the preamplifier name the „x" will be replaced by „A", e.g. VPAC or MIPAC; the bandwidth of the module starts at 10 Hz, 1 kHz or 10 kHz (depending from the uppper corner frequency) 
  • Bandwidth : There are different ranges of bandwidth offered. Please respect, that not all detector preamplifier combinations are possible, it means not all detector bandwidth combinations.

 

2) Controller for the TE cooling

VIGO Controller PTCC-01 OEM VIGO Controller PTCC-01 ADV VIGO Controller PTCC-01 ADV
Controller PTCC-01 in OEM-version Controller PTCC-01-ADV (front view) Controller PTCC-01-ADV (back view)

 

Three standard configurations are available :

  • Laboratory version STCC-04 : The STCC-04 is a standard thermoelectric cooler controller with ±0.01 ºC stability. The unit provides low noise power supply for integrated preamplifiers.
  • OEM configuration MTCC-01 : The MTCC-01 miniature TEC controller is designed to control temperature of 2- or 3-stage TE cooled IR detectors. MTCC-01 can be
    used with the Integrated Detector/Preamplifier Module BIP, MIP, SIP and FIP series. The target temperature is factory adjusted in range of 205 to 255K.
  • Programmable "SMART" TEC Controllers Series PTCC-01 : PTCC-01 is the programmable, precision, low noise, thermoelectric cooler controller series, designed to operate with VIGO IR detection modules. It is compatible with both classic (BIP, MIP, SIP, FIP) and new, programmable PIP preamplifiers, integrated with IR detectors.

 

3) Power supply

VIGO Power supply PPS-03 VIGO Power supply PPS-03
Low-noise power supply PPS-03 (front view) Low-noise power supply PPS-03 (back view)

 

Three standard configurations are available :

  • Preamplifier Power Supply Series PPS-02 : The PPS-02 preamplifier power supply is designed for supplying VIGO System IR Detection Modules included
    uncooled IR detectors.
  • Preampliifer Power Supply Series PPS-03 : The PPS-03 preamplifier power supply is designed for supplying VIGO System IR Detection Modules included
    uncooled IR detectors. (very small size)
  • Preamplifier Linear Power Supply  MPPS-01 : The MPPS-01 preamplifier linear power supply is designed for supplying VIGO System IR Detection Modules included uncooled and cooled (operate with MTCC-01 controllers) IR detectors.